|
|
Optidew tamamen izlenebilir, kalibrasyon veya opsiyonel UKAS onaylı kalibrasyon ile birlikte standart olarak mükemmel bir giriş seviyesi kalibrasyon referansı sunar. Az bir eğitim ile kullanımı oldukça basittir; onu güç kaynağına bağlayın ve ölçüm otomatik olarak başlasın. Kullanım alanları: Metroloji laboratuvarları, basınçlı hava, çevresel odalar, ilaç sanayi, türbin kanatlarının dona karşı korunması, yakıt hücresi araştırılması, yüksek performanslı ticari araç motorlarının testi, güç üretimi.
|
Teknik Özellikler
|
||
| Performans |
|||
|---|---|---|---|
| Measurement Accuracy* | ±0.2°Cdp (±0.32°F) ±0.15°Cdp (±0.27°Fdp) accuracy optional ±0.1°C (±0.18°Fdp) temperature |
||
| Measurement Units |
°C, °F dew point; %RH; °C, °F temperature; g/m3; g/kg; aW; ∆ (t-t dew point) |
||
| Response Speed | 1°C/sec plus settling time (dew point dependant) | ||
| Power Supply | 90 to 264 V AC OR 127 to 370 V DC, 47 to 440 Hz, 20 W max. Internally fused, 4A quick blow | ||
| Çiy Noktası Sensörü |
|||
| Sensor |
1 Stage | 2 Stage | High Temperature PEEK |
| Dew-Point Range | -30°Cdp @ sensor temp of 20°C (-22°Fdp @ sensor temp of 68°F) +90°Cdp @ sensor temp of 90°C (+194°Fdp @ sensor temp of +194°F) |
-40°Cdp @ sensor temp of 20°C (-40°Fdp @ sensor temp of 68°F) +90°Cdp @ sensor temp of +90°C (+194°Fdp @ sensor temp of +194°F) |
-40°Cdp @ sensor temp of 20°C (-40°Fdp @ sensor temp of 68°F) +130°Cdp @ sensor temp of 130°C (+266°Fdp @ sensor temp of 266°F) |
| Temperature Range | -40 to +90°C (-40 to +194°F) |
-40 to +90°C (-40 to +194°F) |
-40 to +130°C (-40 to +266°F) |
| %RH Range | <2 to 100% | <0.5 to 100% | <0.5 to 100% |
| Min Measured Dew Point @ 20°C | -30°C (-22°F) |
-40°C (-40°F) |
-40°C (-40°F) |
| Mirror Material Options | Gold plated copper (standard) Gold stud 316 stainless steel stud** Platinum stud** **Recommended for special applications only, consult Michell Instruments before ordering |
||
| Sensor Body Material Options | Acetal (standard) High temperature PEEK 316 stainless steel** Anodized aluminum** **Recommended for special applications only, consult Michell Instruments before ordering |
||
| Temperature Measurement | 4 wire Pt100, 1/3 DIN class B | ||
| Sample Flow | 0.1 to 2 Nl/min (0.21 to 4.23 scfh) (in sampling block) | ||
| Maximum Velocity | 10 m/sec (32.8 f/sec) direct insertion 30 m/sec (98.4 f/sec) with sintered guard |
||
| Pressure | Standard unit: 2 Mpa / 20 barg / 290 psig (max) Ingress Protection: IP66 High Pressure version: 25 Mpa / 250 barg / 3626 psig (max) Ingress Protection: IP65 |
||
| Cable Length | 2m (6.6'); 50m (164') maximum (up to 250m (820') on special request) | ||
| Uzaktan Kontrollü PRT | |||
| Temperature Measurement |
4-wire Pt100 1/10 DIN class B | ||
| Cable Length | 2m (6.6'); 50m (164') maximum (up to 250m (820') on special request) | ||
| Transmitter Elektroniği | |||
| Resolution |
0.1 for °C, °F and %RH 0.01 for g/m3 and g/kg |
||
| Outputs |
Analog: Two channels 0/4-20 mA Digital: RS232 (RS485 optional) Alarm: Volt free contact, 2 A @ 30 V DC |
||
| Status LEDs | DCC / Alarm Status | ||
| Operating Temperature | -20 to +50°C (-4 to +122°F) ambient | ||
| Enclosure | Standing case with carry handle Panel mounting kit optional | ||
| Ingress Protection | IP54 (NEMA 2) | ||
| Cable Pack | Mains, RS232 cable and output connector |
||
| Genel | |||
| Calibration | 4-point traceable in-house calibration as standard, UKAS accredited calibrations optional – please consult Michell Instruments | ||
|
*Measurement accuracy means maximum deviation between instrument under test and corrected reference. To this must be added the uncertainties associated with the calibration system and the environmental conditions during testing and subsequent use |
|||
İstediğiniz yükleme için lütfen BiS Sistem ile temasa geçiniz.
Tel: + 90 216 326 16 95 - 96
Tel: + 90 541 326 16 95
Fax: + 90 216 326 16 15
Email: info@bissistem.com
BiS Sistem Entegrasyon Elekt.
Bilişim Hiz. Tic. Ltd. Şti.
Adres:
Uzunçayır Cad. No: 39 C1 Blok
Kat: 2 Daire: 20 Posta Kodu:
34722 Kadıköy / İstanbul
